Handles

Black buffalo lyre thumb handle

These handles have been finished to a very high uniform standard and require little sanding and polishing only, before fitting to a suitable shank or left in its smooth satin finish and simply fitted.

Black buffalo large lyre thumb handle

These handles have been finished to a very high uniform standard and require little sanding and polishing only, before fitting to a suitable shank or left in its smooth satin finish and simply fitted.

Black buffalo horn catapult handle

A comfortable thumbstick, easily transformed into working catapult.

Black buffalo Churchill thumb handles

These handles have been finished to a very high uniform standard and require little sanding and polishing only before fitting to a suitable shank or simply leave in its smooth satin finish.

Black buffalo horn  horse shoe thumb handle

These handles have been finished to a very high uniform standard and are ready for shanking needing only polishing only before fitting to a suitable shank or simply leave in its satin finish.

These handles  measure approximately 70mm o/d of horse shoe and approximately 26mm diameter at the joining point.

Black buffalo horn market stick handle

Roughly formed rasped and sanded ready finishing and shanking, these handles are ideal for beginners' or those without bending jigs etc. or even for those too busy to get the equipment out. Excellent value.

Black buffalo horn Pony's foot handle

These handles have been finished to a very high uniform standard and require little sanding and polishing only before fitting to a suitable shank or simply leave in its smooth satin finish.

Ideally suited for walking sticks or riding crops, a nice collar really sets them off.

Rosewood lyre thumb handle

These handles  have been lacquered and finished to a very high uniform standard and require only shanking, as with all woods grain pattern will vary.

Working leg cleek

Made from polished aluminium hole drilled to accept dowel type fit to top of a suitable shank, hole also drilled vertically for extra pinning once glued in position. Quick and easy operation. Making this handle a favourite for farmers/stockmen etc.

Red deer stag antler thumb/fork handle

Colour and shape varies, some have tines/points on, some removed.  Please select from sizes below as required.

Red deer stag antler coronet/ crown handles

Colour and shape varies, some have tines/points on, some removed. Please select from sizes below as required.

Red deer stag antler rolls

Suitable for ski poles, wading pole, knife and craft handles, round in section some pistol shape at one end minimum 4" long, colour and weight varies.  Please select from sizes below as required.

Twin tine antler coronets

These make very impressive handles, can be adapted for twin whistles in tines if required.

Red deer stag antler tine or point  section

Size from 1.5 inches - 5 inches. Colour varies.

Red deer stag antler fishing priest roll section

Size approx 8inches . Colour and shape varies.

Roe Antler pairs

Used for sgian dubh's , catapults, shoe horns, knife handles craftwork etc, various sizes and colours

Black water buffalo horn

From India, this material is ideal for stick-making, once the sanding stage is finished will polish easily to high gloss lustre, some horns may have some colour in them but it is not guaranteed as this is only visible after sanding and polishing. All horns minimum 30mm thick at base.  Length of all horns measured on outside curve. Thickness and shape will vary slightly from images.

Larger horns sometimes available please enquire.

Solid buffalo horn pieces

For capping, but with sufficient material for thumb handles, for sgian dubh handles, blocks etc. approximately 3-4 inches x 2-3 inches x  .75 -1.25 inches

"A" Ramshorn average length 28" measured on outside curve, with sufficient solid horn for a market stick/crook and carving material, it is possible with these horns to make a handle and a thumbstick from one horn.

£20.00   Not Available at the moment

"B" Ramshorn  these horns have sufficient material to form a for a market stickhandle with carving on the nose or heel and spare material for capping etc.

£15.00

"C" Ramshorn  these horns have sufficient material to form a for a market stickhandle or alternatively reverse and and form a half head handle with spare material for capping etc

£10.00

Ultra brass ferrules

These brass ferrules are built with a solid 4mm brass tip which should last the lifetime of the stick

Ultra brass ferrules

These brass ferrules are built with a solid 4mm brass tip which should last the lifetime of the stick

Rubber ferrules

Alpine spike ferrule, these are steel ferrules tapered with hole drilled for pinning and are measured internally from open end

Nickel silver alloy collars, beaded at both ends, adds a nice decorative touch to a handle. Can be engraved, hides and strengthens a joint.

Brass connecter flanged version which has a 25mm diameter flange which can be easily filed or sanded to fit workpiece. Ample length, can be cut easily if required.

Brass connecter straight joint can be used for hidden joint for bone/horn spacer fitted between joint.

8mm Threaded bar 100mm/4" in length for jointing handles

Black buffalo horn spacers  

Bleached white bone spacers 

Brass shoe horn 185mm threaded spigot joint. Ideal for use with stag horn/roe antler or wooden/buffalo horn handles

Split ring/keyring stainless steel for antler whistles/keyrings etc 1"/25mm diameter

Square leather lacing for lanyards, half metre/20" lengths   

Strong nylon lanyard, elasticated grip to fit any size of shank, easily removable  

Sgian Dubh blades with tang ready for mounting in antler roll/roe antler piece,buffalo horn or wood etc

Sgian Dubh. Traditional Scottish pattern with notched or jimped blade and grooved. Made from stunning hi-nickel "raindrop" damascus steel.

Black leather Sgian Dubh. Scabbard/sheaths with celtic knot design on the front.

Bottle openers ready to mount in antler piece or any material of your choice. Very popular mounted on roe antler, drilled at pointed end and split key ring fitted to hang up or on a belt etc

Standard quality hazel shanks seasoned and straightened, good quality shanks, colour from light brown to dark brown and  mottled. Minimum order 3 shanks.

3 hazel shanks £27.00  please note shanks are not available to overseas customers outside the uk

Quality chestnut shanks seasoned straightened with very dark reddy brown colouring, the colour intensifies when finished. These shanks are springier than ash shanks but lighter in weight. Minimum order 3 shanks.

3 Chestnut shanks £22.00 please note shanks are not available to overseas customers outside the uk

Hazel shanks working grade.  Seasoned and reasonably straight with a little work these can be well worth the effort, colour from light to dark. Minimum order 3 shanks.

3 hazel working grade shanks £15.00please note shanks are not available to overseas customers outside the uk

Coloured Hazel shanks seasoned and straightened. Unusual snakeskin and mottled colouring caused by lichen growth and spalting.  Limited stock.

1 shank £12.00 please note shanks are not available to overseas customers outside the uk

Temporarily out of Stock

Second Grade Coloured Hazel shanks seasoned and straightened. Unusual snakeskin and mottled colouring caused by lichen growth and spalting.  Limited stock. Notice some of these shanks have gimps and are not totally uniform but still make very striking sticks

1 shank £10.00 please note shanks are not available to overseas customers outside the uk

2 Part Epoxy glue suitable for wood, metal, leather, plastic, glass and ceramics etc extremely strong glue with a setting time of four to six minutes giving enough time to line up joints etc cap end seals syringe once open
 2 Part glue  £1.50 each

2 Part glue - Pack of 4 - £5.00

STICKMAKING SHOP - all orders  only £2.95 P&P  UK only  -  for overseas postage will be charged at cost

To purchase any of the above items click the Add to Basket button to pay securely by credit or debit card or with your Paypal account online.

Alternatively If you wish to pay by cheque or to discuss your requirements  please email Email or telephone 01688 302251

Stickshop   Walking sticks and crooks for sale online

Back to home page

John Marsh
Baliscate House
Tobermory,
Isle of Mull,
Argyll,
Scotland
PA75 6QA
(+044)(0)1688 302048
Email