|
||||||||||||||||||||||
|
|
||||||||||||||||||||||
|
|
Black buffalo large lyre thumb handle These handles have been finished to a very high uniform standard and require little sanding and polishing only, before fitting to a suitable shank or left in its smooth satin finish and simply fitted.
|
|||||||||||||||||||||
|
|
Black buffalo lyre thumb handle These handles have been finished to a very high uniform standard and require little sanding and polishing only, before fitting to a suitable shank or left in its smooth satin finish and simply fitted.
|
|||||||||||||||||||||
|
|
Black buffalo horn catapult handle A comfortable thumbstick, easily transformed into working catapult.
|
|||||||||||||||||||||
|
|
Black buffalo Churchill thumb handles These handles have been finished to a very high uniform standard and require little sanding and polishing only before fitting to a suitable shank or simply leave in its smooth satin finish.
|
|||||||||||||||||||||
|
|
Black buffalo horn horse shoe thumb handle These handles have been finished to a very high uniform standard and are ready for shanking needing only polishing only before fitting to a suitable shank or simply leave in its satin finish. These handles measure approximately 70mm o/d of horse shoe and approximately 26mm diameter at the joining point.
|
|||||||||||||||||||||
|
|
Black buffalo horn thumb handle, "128" These handles have been finished to a very high uniform standard and require little sanding and polishing only before fitting to a suitable shank or simply leave in its smooth satin finish. These handles are considerably larger than the standard lyre handle we provide approx 130mm in length
|
|||||||||||||||||||||
|
|
Black buffalo horn long nose market stick handle Ready for turning for full curl or drop nosed type handle. Generous amounts of material to play with, there is sufficient material for some modest carving as well.
|
|||||||||||||||||||||
|
|
Black buffalo horn market stick handle Roughly formed rasped and sanded ready finishing and shanking, these handles are ideal for beginners' or those without bending jigs etc. or even for those too busy to get the equipment out. Excellent value.
|
|||||||||||||||||||||
|
|
Black buffalo horn Pony's foot handle These handles have been finished to a very high uniform standard and require little sanding and polishing only before fitting to a suitable shank or simply leave in its smooth satin finish. Ideally suited for walking sticks or riding crops, a nice collar really sets them off.
|
|||||||||||||||||||||
|
|
Rosewood lyre thumb handle These handles have been lacquered and finished to a very high uniform standard and require only shanking, as with all woods grain pattern will vary.
|
|||||||||||||||||||||
|
|
Working leg cleek Made from polished aluminium hole drilled to accept dowel type fit to top of a suitable shank, hole also drilled vertically for extra pinning once glued in position. Quick and easy operation. Making this handle a favourite for farmers/stockmen etc.
|
|||||||||||||||||||||
|
|
Roe Antler pairs Used for Sgian dubh's , catapults, shoe horns, knife handles craftwork etc, various sizes and colours
|
|||||||||||||||||||||
|
||||||||||||||||||||||
| For
guidance on lengths required 11" - 12" - horns market stick nose in, half head or cardigan stick 13" - 14" horns - market stick nose out. 15" horn full plain crook 16" horn full carved crook. 16" plus horns will give adequate material for any of the above and sufficient for whistles, capping or thumb handles as well.
|
Black water buffalo horn From India, this material is ideal for stick-making, once the sanding stage is finished will polish easily to high gloss lustre, some horns may have some colour in them but it is not guaranteed as this is only visible after sanding and polishing. All horns minimum 30mm thick at base. Length of all horns measured on outside curve. Thickness and shape will vary slightly from images. Larger horns sometimes available please enquire.
|
|||||||||||||||||||||
| Ferrules | ||||||||||||||||||||||
|
Ultra brass ferrules
These brass ferrules are built with a solid 4mm brass tip which should last the lifetime of the stick
|
||||||||||||||||||||||
|
Ultra brass ferrules
These brass ferrules are built with a solid 4mm brass tip which should last the lifetime of the stick
|
||||||||||||||||||||||
|
|
Rubber ferrules
|
|||||||||||||||||||||
|
|
Alpine Spike ferrules Alpine spike ferrule, these are steel ferrules tapered with hole drilled for pinning and are measured internally from open end
|
|||||||||||||||||||||
| Collars | ||||||||||||||||||||||
|
|
Silver Nickle Alloy Collars | |||||||||||||||||||||
|
Nickel silver alloy collars, beaded at both ends, adds a nice decorative touch to a handle. Can be engraved, hides and strengthens a joint.
|
||||||||||||||||||||||
|
|
Plain nickel silver alloy collars, adds a nice decorative touch to a handle. Can be engraved,
hides and strengthens a joint.
|
|||||||||||||||||||||
|
|
Buffalo Horn Collars | |||||||||||||||||||||
|
Buffalo Horn barrel pattern collars,
these collars polish easily to a high gloss lustre finish and add that
special look to work piece.
|
||||||||||||||||||||||
|
|
Black Buffalo beaded collars.
Plain beaded collars that can be engraved. 23mm and 25mm internal
diameter, these are easily carved into with mini power tool for personal
engraving or design.
|
|||||||||||||||||||||
|
|
Brass Collars | |||||||||||||||||||||
|
Brass beaded polished collars. Adds a nice decorative touch to a handle and can be
engraved. Hides and strengthens joint.
|
||||||||||||||||||||||
|
|
Plain polished brass collars
25mm
internal diameter. Adds a nice decorative touch to a handle and can be
engraved. Hides and strengthens joint.
|
|||||||||||||||||||||
|
|
Plain polished brass collars 21mm internal diameter. Adds a nice decorative touch to a handle and can be engraved. Hides and strengthens joint. | |||||||||||||||||||||
|
|
Antler barrel collars various sizes
and colours, drilled out to allow 8mm threaded rod to pass through and
butt joint only, easily filed or sanded to fit work piece
|
|||||||||||||||||||||
|
|
Nickel silver flanged rings 27mm.
Fits nicely to most handles in range. Nice discreet joint cover with a
touch of class
|
|||||||||||||||||||||
| Miscellaneous | ||||||||||||||||||||||
|
|
Brass connecter flanged version which has a 25mm diameter flange which can be easily filed or sanded to fit workpiece. Ample length, can be cut easily if required.
|
|||||||||||||||||||||
|
|
Brass connecter straight joint can be used for hidden joint for bone/horn spacer fitted between joint.
|
|||||||||||||||||||||
|
|
8mm Threaded bar 100mm/4" in length for jointing handles
|
|||||||||||||||||||||
|
|
Black buffalo horn extra thick spacers for a wide joint with sufficient horn width for engraving initials or carving. 13mm thick 300mm diameter.
|
|||||||||||||||||||||
|
|
Black buffalo horn spacers
|
|||||||||||||||||||||
|
|
Bleached white bone spacers
|
|||||||||||||||||||||
|
|
Brass shoe horn 185mm threaded spigot joint. Ideal for use with stag horn/roe antler or wooden/buffalo horn handles
|
|||||||||||||||||||||
|
|
Split ring/keyring stainless steel for antler whistles/keyrings etc 1"/25mm diameter
|
|||||||||||||||||||||
|
|
Small plastic compass for inserting in
top of antler handle or direct into shank/pole 20mm
|
|||||||||||||||||||||
|
|
Square leather lacing for lanyards, half metre/20" lengths
|
|||||||||||||||||||||
|
|
Strong nylon lanyard/wrist cord, elasticated grip to fit any size of shank, easily removable
|
|||||||||||||||||||||
|
|
Sgian Dubh blades with tang ready for mounting in antler roll/roe antler piece,buffalo horn or wood etc
|
|||||||||||||||||||||
![]() |
Sgian Dubh. Traditional Scottish pattern with notched or jimped blade and grooved. Made from stunning hi-nickel "raindrop" damascus steel.
|
|||||||||||||||||||||
|
|
Black leather Sgian Dubh. Scabbard/sheaths with celtic knot design on the front.
|
|||||||||||||||||||||
|
|
Bottle openers ready to mount in antler piece or any material of your choice. Very popular mounted on roe antler, drilled at pointed end and split key ring fitted to hang up or on a belt etc
|
|||||||||||||||||||||
|
|
2 Part Epoxy glue suitable for wood, metal, leather, plastic,
glass and ceramics etc extremely strong glue with a setting time of four
to six minutes giving enough time to line up joints etc cap end seals
syringe once open
|
|||||||||||||||||||||
|
|
2 Part glue - Pack of 4 - £5.00
|
|||||||||||||||||||||
|
STICKMAKING SHOP Overseas orders are subject to a surcharge in addition to the standard £3.95 postage Please note we we no longer ship to Canada and the USA
|
|
|
To purchase any of the above items click the Add to Basket button to pay securely by credit or debit card or with your Paypal account online. Alternatively If you wish to pay by cheque or to discuss your requirements please email Email or telephone 01688 302251 Stickshop Walking sticks and crooks for sale online
|
John Marsh
|